The paint on a newly painted vehicle must be cured according to manufacturer’s recommendations. Your body shop should be able to provide you with this information.
3M recommends that any repainted surfaces on your vehicle be professionally painted and fully cured before applying paint protection film. If you have touched up scratches or chips with a tube of “touch-up" paint and then apply paint protection film over it, the film will protect that area until it is removed. If the paint protection film is removed, it is possible that the area around the non-professional touch-up paint could peel off.
If the film is properly applied to a fully cured painted vehicle, it can be removed, usually in one piece, without damaging paint surfaces beneath the film.
The clear film will not interfere with vinyl or painted graphics and is designed to match the gloss levels of today’s automotive factory clearcoat paint systems, providing virtually invisible protection. However, if the Scotchgard™ Paint Protection Film is removed, damage may occur to the underlying graphic during the removal process.
Many professional certified installers have extensive experience and can answer your questions or browse this website for information on Scotchgard™ Paint Protection Film and a listing of professional certified installers.
3M strongly recommends that Scotchgard™ Paint Protection Film be installed by a fully trained and certified, professional certified installer. These are skilled certified installers in applying the film around compound curves, challenging grillwork, wheel openings, bumpers and all other areas on today’s vehicles.
No, this is not recommended and is at your own risk. 3M film is supplied with an OEM-approved clearcoat which is not formulated to be over-printed, painted or clearcoated.
Once applied, refrain from washing the vehicle in an automated car wash for 24 hours. Washing after that time presents no problem, and no special care need be taken for the film.
Scotchgard™ Paint Protection Film is available only as a clear film. This feature makes the film virtually invisible while protecting the beauty of your vehicle.
Yes, it resists yellowing because the film is constructed of thermoplastic urethane, a tough, conformable material that is covered by a clear coat layer. The film and clear coat layers contain UV protectants to counteract harmful ultraviolet rays that can cause yellowing.
The film would probably stick, but you would need to test any specific application. 3M has no specific testing data for signs, so no warranty can be offered.
Aircraft requirements are completely different than automotive, so it is important to contact 3M’s Aerospace Division for information on these applications. Please call 1-888-364-3577 for assistance or use the on-line 3M Aerospace Contact Us form.
Yes. Marine requirements are different than automotive, so it is important to contact 3M’s Marine Trades Division for information on these applications. For specific information, please call 3M Marine at 1-877-366-2746 for assistance.
This is a question for your professional certified installer. There are many makes and models of cars, trucks, RVs and boats. On personal vehicles Scotchgard™ Paint Protection Film is most often used to cover the front portion of the hood. 3M film is also commonly applied to painted bumpers, mirror backs, truck bed rails, door handle inserts, door edges, rocker panels, mirror backs, wheel openings, etc. Any painted surface of a car, truck, van, SUV, RV, boat or motorcycle that is susceptible to bug damage and rock chips can be covered with paint protection film. Since the amount of film required and difficulty of application will vary by vehicle model, 3M suggests you contact professional certified installers near you for their recommendations and price quotes.
In the United States, Scotchgard™ Paint Protection Film does not meet the Department of Transportation’s standards for optical clarity. Other countries may have different legislation. Please contact your local 3M Representative to help answer this question in your country.
3M warrants that Scotchgard™ Paint Protection Film, installed after November 1, 2003, will be free of defects in materials and manufacture — including yellowing, bubbling, or cracking — for five (5) years from date of purchase. This warranty does not apply to damage caused by misuse, accident, misapplication, or ordinary wear, nor does it apply to dents caused by physical impact of rocks or road debris.
Contact your Scotchgard™ Paint Protection Film professional certified installer immediately.
After Scotchgard™ Paint Protection Film has been removed, how do I get any excess adhesive off my vehicle?
If any adhesive remains on the vehicle after removal of the film, it can be removed by using 3M™ General Purpose Adhesive Cleaner (3M Part #08984), according to the package directions.
Once the film has been applied and set, the adhesive will not stick a second time.
If desired, film can be removed at any time by picking up a corner of the film and pulling the film off the vehicle surface at a 90-degree angle. If the film has been present a long time, or if the film and vehicle are cold, a heat gun or hair dryer may be used to soften the adhesive, allowing easier removal. If any adhesive remains on the vehicle after removal of the film, it can be removed by using 3M™ General Purpose Adhesive Cleaner (3M Part #08984), according to the package directions.
To make a claim under this warranty, simply contact 3M at 1-800-643-0955. 3M will direct you to an certified installer selected by 3M to have your Scotchgard Paint Protection Film inspected and, if your claim is covered by this Warranty, 3M will have the certified installer remove the old and reapply new Scotchgard Paint Protection Film.
Remedies and Limitations: The 3M warranty and limited remedies stated in this document are exclusive and is made in place of all other express or implied warranties, including any implied warranty of merchantability or fitness for a particular purpose. 3M shall not be liable for any other damages or costs, including incidental or consequential damages, arising out of the use of inability to use Scotchgard paint Protection Film or any vehicle to which it has been applied.
3M sells larger rolls of film to selected 3M Authorized Distributors and Converters and not to end consumers. 3M does not manufacture vehicle-specific film kits nor does 3M install kits on consumer vehicles. There are hundreds of professional certified installers throughout the United States that sell film kits who also apply it to your vehicle. Click on “Where to Buy" in the “Consumer" section of this website to search by the city and state to find the nearest professional certified installer(s).
3M makes a variety of products to help maintain the beauty of your vehicle. 3M™ Car Wash Soap (3M Part #39000), 3M™ Show Car Paste Wax (3M Part #39526 and 3M™ Perfect-It Show Car Liquid Wax (3M Part #39026). The best surface cloth to use is the 3M™ Perfect-IT™ III Detailing Cloth (3M Part #39016) since others may scratch the surface of the film.
Yes. When waxing the vehicle, some wax may build up along the film edges. This can easily be removed when dry with a soft cloth, such as a 3M™ High Performance Cloth. Do not use any waxes containing dyes or waxes that are not recommended for urethanes. Abrasive polishes and/or rubbing compounds are not to be used.
Why Our Services?
Automotive Window Films
There are thousands of window film dealers in the country, but only a select few have been chosen to be 3M Prestige Window Film Dealers.
3M Prestige Dealer
3M Prestige dealers are selected because of their ability to offer superior quality work, extensive product knowledge, and their ability to serve their customers to the highest standards.
Residential Window Films
The quality of our residential & commercial window films is confirmed by an ISO 9002 certification and the satisfaction of hundreds of thousands of users worldwide.